Fix The RPC server is unavailable error in Windows 10

Remote Procedure Call (RPC) is a technology present since the emergence of computers and utilizes the interprocess communication technique. Its primary purpose is to enable a client and a server to communicate with each other over the network. Some users subsequently completing an upgrade to a newer version of Windows 10 might notice that executing any remote command fails with the error message The RPC server is unavailable – prior to the upgrade these remote commands execute successfully. In this mail service, we will place the potential causes and then provide the possible solutions that you tin can try to aid remediate this effect.

The fault bulletin The RPC Server is unavailable can exist triggered by any of the following:

• Ane or more services required past RPC are disabled.
• Remote assist is disabled by the Firewall.
• IPV6 or File Printer Sharing is disabled.
• The IP accost is crashing the RPC server.
• RPC services are disabled via Registry.

Read: How to troubleshoot Remote Procedure Call errors & problems.

The RPC server is unavailable in Windows xi/10

If you are faced with this error, you can try the recommended solutions below.

1. Bank check RPC service on your computer
2. Enable Remote Desktop/Assistance in Firewall
3. Change Startup Choice from Selective startup to Normal startup
4. Enable IPV6 and File & Printer Sharing for the connected network
5. Affluent DNS & Renew
6. Strength RPC services to kickoff using Registry Editor.

At present, let'southward delve into the detailed steps of these solutions.

i] Check RPC service on your calculator

This solution implies that conflicts with other third-political party applications or changing the system systems might force the RPC service to go from the default (Automatic) value to manual. This means that RPC might non start automatically when needed.

To cheque RPC service on your computer, practise the following:

• Press Windows + R, type services.msc in the dialog box and hit Enter.
• Once in the Services window, search for the following processes:

Remote Procedure Call (RPC)

RPC Endpoint Mapper or Remote Procedure Call (RPC) Locator

DCOM Service Procedure Launcher

• Right-click on each service one by one and select Backdrop.
• Once in properties, make certain that the service is Startedand theStartup typeis prepare asAutomatic.
• Salvage changes and exit.

Restart your reckoner and meet if the upshot is resolved.

ii] Enable Remote Desktop/Assist in Firewall

To allow Remote Assistance in firewall on your computer, do the post-obit:

• Printing Windows key + R, type control in the dialog box and hitting Enter.
• Once the control panel pops up, type Firewallin the search bar at the height-right side of the window and striking Enter.
• From the results, click on Allow an app through Windows Firewallwhich is a subcategory underneathWindows Firewall.
• Click on Change settingsand make certain that entries enforcing RPC are checked such as Remote Assistance.

Restart your computer and see if the issue is resolved.

3] Change Startup Selection from Selective startup to Normal startup

The selective startup is a booting method which allows your computer to plow on with a minimal number of items loaded. This is usually washed when troubleshooting issues with your computer which might involve other tertiary-party applications. However, whenever you boot using selective startup, your figurer will also not load all the RPC components onto your computer. In this case, we will select the normal startup and run across if this fixes the event. Here's how:

• Press Windows key + R, type msconfig in the dialog box and hitting Enter.
• Once in the startup configuration, select the tab Generaland cull the selectionNormal startup.
• Click Employ > OK to save changes and exit.

You will exist prompted for a restart. Restart immediately using the popped-upwards window and cheque if the error message is resolved.

iv] Enable IPV6 and File & Printer Sharing for the connected network

In some cases, you might encounter theError 1722: The RPC server is unavailableeffect in instances where there'southward a network connection interruption acquired by one or multiple settings. In this case, enabling IPV6 and File & Printer Sharing for the connected network could resolve the issue. Do the following:

• Press Windows key + R and then blazon ncpa.cpl in the Run dialog box and hit Enter to open up theNetwork Connections window.
• Inside the Network Connections window, right-click on the network that you're currently connected to and hitting Properties.
• Once y'all get to the Properties of your network connection, get to the Networking tab and roll down through the list of items.
• Locate File andPrinter Sharing for Microsoft Networks andCyberspace Protocol Version 6 (TCP/IPv6)and make certain that both associated boxes are checked.
• Click Ok to save the changes.

Restart your computer and see if the event is resolved at the next startup.

5] Flush DNS & Renew

This solution requires you to ensure that the services involved in the RPC connexion are running (as outlined in solution ane above) before y'all proceed to affluent the DNS and renew the connection.

If y'all're certain that the required services are running, and then follow the instructions below to flush the DNS and renew the connexion.

• Launch control prompt in elevated manner.
• Inside the elevated Command prompt, blazon the following command and hitting Enter to flush the current IP Configuration:

ipconfig /flushdns

• Once the command is successfully registered, type the post-obit command and hit Enter to renew the IP Configuration:

ipconfig /renew

Once the IP has been renewed, close the elevated Control Prompt and execute remote commands and see if the issue has been resolved.

6] Forcefulness RPC services to get-go using Registry Editor

To utilise Registry Editor to force RPC services to start, practise the post-obit:

• Launch Registry Editor.
• Inside the Registry Editor, apply the left-hand pane to navigate to the post-obit location:

HKEY_LOCAL_MACHINE\Organisation\CurrentControlSet\Services\RpcSs

• With the RpcSs key selected, move down to the correct-hand pane and double-click onFirst to edit its properties.
• In the properties box, gear up theBase toHexadecimal and theValue information toii.
• Click OK to enable theRemove Process Call (RPC).

Next, use the left-hand pane or the navigation bar at the top (paste the registry path and hit Enter) to navigate to this location:

Calculator\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DcomLaunch

• One time you get to that location, double-click on Outset from the correct-manus pane.
• And so, set the Base toHexadecimal and the value data toii.
• Click OK in order to enable the DCOM Server Process Launcher.

Lastly, navigate to the following location by using the navigation bar at the peak or past using the left-hand pane:

Figurer\HKEY_LOCAL_MACHINE\Arrangement\CurrentControlSet\Services\RpcEptMapper

• Move over to the right-paw pane and double-click on Start.
• So, set up theBase toHexadecimal and theValue Information toii.
• Click OK.

Close the Registry Editor, restart your computer and see if the 'The RPC server is unavailable' outcome has been resolved at the side by side organization startup.

Cheque these related posts if you receive:

1. How to fix Remote Procedure Call errors & issues
2. The Remote Procedure Call Failed error for Microsoft Store apps
3. The Remote Procedure Call Failed while making PIN as Sign-in Option
4. The remote procedure telephone call failed error while using DISM.

Source: https://www.thewindowsclub.com/the-rpc-server-is-unavailable-windows-10

Posted by: dicksoniniand59.blogspot.com

Share this post